Instruction Manual
5
Use serving size markings as a guide for appropriate ice and liquid levels
4. Slide Bowl into groove on main body and turn clockwise until it stops. This will allow the Mixing
Paddle to mix ice and ingredients once operation begins (fig3)
5. Place ice in Ice Shaving Chamber. Do not shave ice above MAX line.
6. Turn Selector knob to desired setting. Fine setting produces finer ice. Coarse Cone setting produces
coarser ice.
7. Plug cord into outlet.
8. Place Lid on main body and turn counterclockwise to engage the interlock switch. The unit will start
and begin to shave ice (fig4)
Fig.1 Fig.2 Fig.3 Fig.4
CLEANING AND STORAGE
1. Do not use agents of cleaning abrasive as a scouring pad, acetone, alcohol, etc. for the cleaning.
2. Switch off the appliance, unplug it
3. Clean the ice shaving chamber, the bowl, the mixing paddle with hot soapy water.
4. Wipe the appliance surface with soft damp cloth
5. Never put in dishwasher
To Next Page
Loading...
