Need help?Do you have a question about the Livoo DOP227 and is the answer not in the manual?
This document provides an instruction manual for a LIVOO hand blender, designed to assist users in understanding its function, usage, and maintenance. The hand blender is a versatile kitchen appliance intended for household and similar applications, such as staff kitchen areas, farmhouses, hotels, motels, and bed and breakfast environments. It is designed to simplify various food preparation tasks, including blending baby food, soups, sauces, milkshakes, and mayonnaise.
The hand blender is primarily used for mincing or mixing food. It consists of a motor unit and a removable stainless steel stick with sharp cutting blades. The motor unit houses the controls, including a variable speed control knob, an on/off switch, and a turbo switch. The removable stick, which contains the blending blades, attaches to the motor unit. The appliance operates by rotating these blades at high speeds to process ingredients.
To use the hand blender, ingredients are placed in a beaker or bowl. If the ingredients are hot, it is crucial to allow them to cool below 70°C to prevent overheating the appliance housing. The stick blender should always be used with ingredients combined with water or other liquids for optimal blending.
The assembly process involves holding the motor unit upright and turning the blender stick clockwise until it locks securely into place. Once assembled, the appliance can be connected to a power outlet. To prevent spattering, the blender should be immersed in the ingredients before being switched on.
The user must firmly hold the bowl containing the ingredients while mixing. The blending speed can be adjusted by turning the variable speed control knob. To activate the blender, the on/off button is pressed. This button allows for continuous blending or pulsing, and the speed can be gradually adjusted while blending. Releasing the button will stop the blending action.
For tasks requiring maximum power, the turbo button can be pressed directly. This activates the turbo speed, which cannot be gradually adjusted during blending. Similar to the on/off button, releasing the turbo button will stop the blending. During operation, moving the blender downward and upward helps to thoroughly mix the food.
The hand blender is designed for ease of use and efficiency in various blending tasks. It is important to note that the base of the blender, which contains the motor, must not be immersed in liquid. After each use, it is essential to unplug the appliance and disassemble the fitting for cleaning and storage.
Proper cleaning and storage are crucial for maintaining the hand blender's performance and longevity. Users are advised to exercise caution when handling the chopping blade, as the blades are very sharp and can cause injury if touched.
Before cleaning, ensure the unit is unplugged from the wall outlet. The removable part (blender stick) should be detached from the motor base. This part can be cleaned with soap and water. It is recommended to clean accessories immediately after use, washing them in warm soapy water, rinsing thoroughly, and drying before storage. This practice makes cleaning easier and more effective.
The motor base, which contains the electrical components, should be cleaned with a damp cloth and then wiped dry. It is critical never to immerse the motor base in water or hold it under running water, as this can damage the electrical components and pose a risk of electric shock.
To prevent damage to the hand blender's surfaces, users should avoid using harsh detergents or abrasive materials for cleaning. Gentle cleaning methods are sufficient to maintain the appliance's appearance and functionality.
The appliance is not intended to be operated by external timers or separate remote control systems. Accessories other than those supplied with the appliance should include instructions for their safe use. There is a potential for injury from misuse, emphasizing the importance of following the instructions carefully.
In case the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards. Any repairs should be performed by a competent qualified electrician to ensure safety and proper functioning. The manufacturer reserves the right to make modifications to the product without prior notice, reflecting their commitment to quality.
The product's packaging includes a symbol of a crossed-out dustbin, indicating that old household electrical appliances should not be disposed of in the normal household waste stream. Instead, they must be collected separately to optimize the recovery and recycling of materials, reducing environmental impact and promoting human health. Consumers should contact their local authority or retailer for information on correct product disposal.
General| Power | 300 W |
|---|---|
| Capacity | 0.6 L |
| Material | Plastic |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
To Next Page
