LIYU DMS FH3204 - Print Head Configuration List; Printing Efficiency List; Important Particulars

Maschinenvertrieb
LIYU DMS GmbH
www.liyu-dms.com 5 info@liyu-dms.com
Environmental
Requirements
Temperature 15
0
C ~ 30
0
C Relative humidity 40% ~ 80%
Other Features
Anti-collision, media positioning, impressing ink with color
separation, degassing (optional), platform adsorption (optional)
 Print head configuration list
Number of
print heads
KM1024i MAE-C Print Head
4
Four colors and four print heads
8
Four colors and eight print heads
6
Six colors and six print heads
 Printing efficiency list
The efficiency of KR series UV flat-roll inkjet printer could be affected by the number of print
heads and printing mode. Here only the efficiency for printing colors shall be listed.
The number of print heads below refers to the number of color print heads.
Print head Type
KM1024iMAE
-
C 14 pl
Number of Print
head
4/6
8
Draft Mode
(2PASS)
106 m
2
/h
200 m
2
/h
Working Mode
(3PASS)
78 m
2
/h
135 m
2
/h
Precision Mode
(4pass)
61 m
2
/h
96 m
2
/h
Important particulars
The negligence of precautions mentioned below may seriously affect the working conditions
of the equipment, equipment service life or the service life of relevant parts, or even cause
the permanent damages of relevant parts, and may endanger staff’s physical and mental
health in some cases. Please operate in strict accordance with instructions.
1. If developing machine is used for coloration, different degrees of deformation may happen
to the materials due to the high temperature after coloration. Please test the shrinking ratio