Maschinenvertrieb
LIYU DMS GmbH
www.liyu-dms.com 8
info@liyu-dms.com
Operation precautions
Power supply
1. Inkjet printer shall be installed near the power source convenient to use and
the connecting outlet must be solid and reliable.
2. Relatively stable power supply in accordance with technical specification of
inkjet printer shall be used.
3. Connect the power line to a separate outlet and never share the same
power outlet with other equipment.
4. Pay attention to the order of power on and off so as to avoid damages to
print head.
5. In case of unstable local voltage, please use voltage stabilizer to guarantee
the stable voltage and choose the famous brand products, because inferior
products may cause equipment fault or damage electrical component of the
equipment (including print head).
Inkjet printer
1. Don’t place anything on the platform of the inkjet printer so as to avoid
damages to print head.
2. In case of any maintenance for the machine as regards electrical control,
please be sure to disconnect the power of inkjet printer.
3. Never touch the surface of print head with hands or hard objects.
Regular inspection and maintenance
1. Fill lithium base grease in mechanical parts with grease gun on a regular
basis, in circumstances of normal printing, fill in the ink carriage linear guide
once for every five shifts.
2. Refer to maintenance section for maintenance methodology of ink and print
head.
To Next Page
