Need help?Do you have a question about the LO NEXT and is the answer not in the manual?
General| Brand | LO |
|---|---|
| Model | NEXT |
| Category | Indoor Furnishing |
| Language | English |
Shelf elements must not exceed a total height equal to five files.
LO Next shelf elements must not be stacked.
Maximum load of shelf elements is 125 kg/m2.
At least one back panel must be fitted per file height in each shelf element.
Back panels may only be fitted or removed if drawers or doors have been removed.
Back panels are clipped into a slot on the vertical supports.
Back panels with counterweights can only be used with A4 drawers.
If multiple drawers are fitted, corresponding counterweight back panels must be fitted. Tipping hazard!
Drawers may be fitted up to three files high and in two-thirds of compartments with counterweights.
For over 1/3 built-in compartments, use the LO Next configurator for back panel calculation.
It is not possible to fit two A6 drawers on top of each other in the same compartment.
Level the unit after the first file height assembly and again after completing assembly.
Only use a mild cleaning product and damp cloth to clean the surfaces.
Repairs and modifications may only be made by the manufacturer or authorised staff.
For more information, see homepage www.lista-office.com/downloads.
To Next Page
