Need help?Do you have a question about the LO Pure and is the answer not in the manual?
General| Brand | LO |
|---|---|
| Model | Pure |
| Category | Indoor Furnishing |
| Language | English |
Read and store the manual. Understand user qualifications and supervision needs for safe operation.
Understand user qualifications and supervision needs for safe operation.
Hold and lift the desk using only the sub-frame or legs to prevent damage.
Ensure correct power supply and re-initialize drives after power outages for synchronization.
Re-initialize drives after power outages for synchronization.
Maintain 25mm clearance around the table for height adjustment and avoid combining tables.
Avoid positioning the desk flush with similar or other tables to prevent damage.
Check cable length, avoid routing to other devices, and prevent pinching or crimping.
Ensure cables are not pinched or crimped to maintain functionality.
Understand the meaning of 'Up/Down' keys on the control unit for desk operation.
Understand the meaning of 'Memory' keys on the control unit for desk operation.
Learn to use the 'S' button to save preferred height settings to memory slots.
Save the set height by pressing the corresponding position button within 3 seconds.
Calibrate the desk's height display by pressing specific buttons and setting the correct value.
Observe motor duty cycle limits to prevent overheating.
Consult error codes for troubleshooting desk malfunctions.
Understand situations where anti-collision may fail during operation or initialization.
Be aware of 'No personal protection' implications related to anti-collision.
View maximum load capacity (60kg) and weight details for different desk sizes.
Note the noise emission level, which is less than 55 dB.
Connect all cables before plugging into the power grid.
Information on the traversable cable conduit.
Install the cable conduit segments for proper cable management.
Learn about the magnetic holder for the cable conduit.
Attach the CPU holder to the desk subframe.
Secure the CPU using the provided strap.
Use the correct bracket for the 22mm thick organisation wall.
Instructions for levelling the desk.
Information on extensible and traversable pencil trays.
Only authorized personnel can perform repairs.
Clean controls with a dry or slightly moist cloth; mechanical parts are maintenance-free.
To Next Page
