LP950 OPERATORS MANUAL
9
Power
Requirements -
11.2 to 32V DC.
Average Current when Printing:
0.75A @ 12V DC input
0.4 A @ 24V DC input
Peak Current when Printing:
3.0A @ 12V DC input
1.3A @ 24V DC input
Standby Current:
100mA max
40mA typ. @ 24V
Power Input
Protection -
Series diode to protect against reverse
voltage. Input filter and high voltage pre-
regulator into switch-mode main regulator to
protect against "load-dump" and automotive
transients.
To Next Page
Loading...
