To Next PageTo Next Page
Need help?Do you have a question about the Lochinvar EnergyRite ER152 and is the answer not in the manual?
General| Brand | Lochinvar |
|---|---|
| Model | EnergyRite ER152 |
| Category | Water Heater |
| Language | English |
Defines DANGER as an imminently hazardous situation with potential for death or serious injury.
Defines WARNING as a potentially hazardous situation that could result in death or serious injury.
Defines CAUTION as a potentially hazardous situation with potential for minor or moderate injury.
Indicates special instructions for operation or maintenance, not related to personal injury.
Covers critical safety notices, gas leak procedures, warranty, and equipment checks.
Safety rules for spa and hot tub users to ensure proper and safe operation.
Details standards and local codes that govern pool heater installation and operation.
Detailed explanation of all major components and their functions within the pool heater.
Guidelines for selecting a safe and appropriate installation location for the pool heater.
Specifies clearances from combustible materials and air supply needs for safe operation.
Details the six available venting system options for the pool heater.
Covers general rules for vent installations, outdoor installation, and barometric damper location.
Provides specific details and requirements for the outdoor vent cap.
Instructions for removing the outdoor vent cap and installing optional vent kits.
Describes the requirements for a conventional negative draft venting system.
Addresses potential issues and procedures for common venting systems.
Specifies termination requirements for vertical venting systems.
Covers installation and inspection requirements for masonry chimneys.
Details the DirectAire Vertical system with sidewall or rooftop air inlet.
Explains sidewall and rooftop air inlet configurations for DirectAire Vertical systems.
Covers materials for air inlet pipes and details on available vent kits.
Provides requirements for venting flue products vertically.
Describes the power sidewall venting system using a sidewall vent cap.
Details the DirectAire Horizontal system with sidewall flue and air inlet.
Explains the E-Rite system for sidewall venting under limited lengths.
Covers sealing requirements for vent materials and drain tee installation.
Specifies termination and inlet requirements for the E-Rite sidewall system.
Covers gas supply requirements, pipe sizing, and gas pressure testing.
Details specific requirements for LP gas installations and pipe connections.
Specifies connection types, minimum flow rates, and piping recommendations.
Details the installation and adjustment of an auxiliary bypass for high flow rates.
Covers chemical feeder usage and optional relief valve installation.
Instructions for 240VAC to 120VAC conversion and general wiring practices.
Details terminal strip connections for remote controls and proving switches.
Explains integrated controller functions, temperature adjustment, and safety limits.
Procedure for adjusting the water pressure switch for optimal operation.
Step-by-step guide for safely starting up the pool heater.
Tips for efficient operation and reducing energy consumption.
Procedure to verify gas supply pressure before and during operation.
Overview of how the pool heater and its control module operate.
Details the safety limit controls and protection mechanisms of the unit.
Explains auxiliary safety inputs and data logging capabilities.
Step-by-step breakdown of the unit's operational sequence during heating.
Guide to using the control panel for temperature settings and monitoring.
Describes the different operation modes and status display screens.
Visual representation of the electrical connections within the pool heater.
Schematic showing the logic and sequence of electrical controls.
Explains the operation and components specific to ASME certified pool heaters.
Details water connection options and auxiliary bypass for ASME models.
Covers adjustment of the auxiliary bypass and the relief valve for ASME units.
