Lockly PRO - Step 1: Installing the Lockset

1. Extend the hook by inserting a
screwdriver on the cross hole
3. Insert the lockset to the edge door
hole, make sure hook is on the top and
the cross hole is on vertical position.
Secure the lockset with screws K (2X)
K(2X)
1
2
2. Unscrew and detach the face plate
(V).
4. Attach the Face plate (V) back to
the lockset (J). Secure face plate with
screws W (2X).
V
use a
screwdriver
and screws
4
INSTALLING THE LOCKSET (J)
Step 1