15SECTION 4.2~4.3
4.2 Adding an Access Code
Enter the App Access Management settings then tap "Add New User". Select the type of user you
wish to add access, “Trusted User”, “Guests”, “Admin”. For example, select Trusted User, enter the
user’s name and set the Access Code. Re-enter the access PIN code, then tap “Confirm” to
successfully add the new access code.
The default access code 123456 can not be deleted until a new access code has been
setup. Immediately setup a new access code and delete the default access code
for your security.
**Lockly\OS is premium paid subscription recommended for property management
or for homes and businesses with multiple Lockly devices.
4.3 Checking/Deleting an Access Code
Access codes can only be deleted through the App. Enter the App Access Management and you
can view all the issued access code users. Tap the access code user you wish to be deleted. Check
access code and user name is correct, then tap "Delete User" to complete deleting the user access
code.
An access code is a combination of 6 to 8 digits. Using the Lockly app, the Administrator can set up
and assign up to 37 free access PIN codes or up to 100 access codes through Lockly/OS**
Default access code 1 2 3 4 5 6 becomes invalid once an administrator access code is setup.
To Next Page
Loading...