2
Phillips Screwdriver
To complete the installation you will need:
Flathead Screwdriver Tape measure or ruler
Preparation
Before installation and setup of Lockly Vision Elite, it is important to charge the
lithium battery for a full 12 hours. A sufficiently charged battery is necessary to
establish connection between the lock and the app. We strongly recommend
ensuring the battery is fully charged before proceeding with the installation
process.
The lock contains electrostatic-sensitive (ESD) parts. Best practices: ground
yourself by touching a metal surface other than lock to discharge any ESD
you might have; don't wear clothes prone to static (ESD); avoid touching
electronic internal pins and circuit board.
To Next Page
Loading...
