10
Automatic station search
This TV set is equipped with a tuner which can
store the various TV channels on 99 station slots.
Preparation:
Connect the TV to the antenna system. See
“Connection” on page 8.
Press
MENU
.
The “TV menu” is displayed.
OK
MENU
END
TV menu
End
Back
Picture
Sound
PIP
Programmes
Settings
Select the option “Programmes” with v / V
and press B.
Note: The “PIP” menu item is only displayed if
the PIP is open. The “Programmes” item is omit-
ted if an AV input is selected.
1.
2.
Select the option “Automatic Search” with v /
V and press B.
OK
MENU
END
Tuner settings
End
Back
Automatic search
Manual adjust
Sort
Delete
Select an option with v / V and change the
selection if necessary with b / B
OK
MENU
END
Automatic station search
End
Back
Location of set
Scope of search
TV standard
Store stations beginning at
Start search
Great Britain
All stations
Auto
1
Location of set: Select a country. This de-
termines the automatic station sorting which
directly follows the automatic search.
Scope of search: “All Stations” or “New Sta-
tions” can be selected
TV Standard: The TV standard is recognized
automatically in the “Auto” setting otherwise
only stations with the set standard are broad-
cast correctly.
3.
4.
Store stations beginning at: Defi nes the
station slot where storing of the found sta-
tions begins.
Select “Start Search” and press OK to start
the station search.
The tuner runs through all the available chan-
nels automatically and transfers the found
stations to the memory.
Automatic station search
Stop search
Station search in progress ...
Station
Number found
15 %
-----
0
This process may last a few minutes. At the
end of the search, the TV switches to the
station slot which you entered under “Store
stations beginning at”.
5.
Initial installation
32241 Concept L42_Buch_GB.indd 1032241 Concept L42_Buch_GB.indd 10 11.02.2005 14:09:22 Uhr11.02.2005 14:09:22 Uhr
To Next Page
