Loewe Connect ID 55 DR+

Questions and Answers

P
Paula PhillipsAug 18, 2025
How to change the language on my Loewe Connect ID 55 DR+?
- W
  William ParkerAug 18, 2025
  If your Loewe TV menus are in the wrong language, you can change it by pressing the HOME key. Navigate to the last menu item (bottom left), then select the fourth item from the top in the list and move to the next column on the right. Select the first item with OK, choose your preferred language, and confirm with OK.
L
Louis MatthewsAug 20, 2025
What to do if there is no sound on my Loewe Connect ID 55 DR+ when playing media files?
- C
  Christopher SanchezAug 21, 2025
  If you're not hearing sound when playing video or music files on your Loewe TV, first, ensure the TV isn't muted and the volume is at an audible level by pressing the V+ key on the remote. Also, check under System settings > Connections > Sound components to ensure that a non-existent or disconnected audio device isn't selected. If so, connect the audio device and switch it on, or revert to TV speakers in the Sound components wizard.
J
Jimmy JohnsonAug 23, 2025
Why is there no sound from my Loewe Connect ID 55 DR+ when using an external digital audio amplifier?
- L
  Logan MeltonAug 23, 2025
  If you're not getting sound through your external digital audio amplifier with your Loewe TV, it could be that the amplifier doesn't support the selected sound format (Dolby Digital, dts, MPEG). To resolve this, set PCM stereo on the DVD player in the sound selection. For DVB stations, switch Language/Sound.
E
earlwalkerAug 26, 2025
Why does my Loewe TV switch off automatically?
- C
  cheryl39Aug 26, 2025
  Your Loewe TV might be switching off automatically to save energy. This happens after 4 hours of inactivity if at least one signal input group is set to Home Mode. Using automatic shutdown is recommended for energy saving and safety.
B
Brittany HoffmanAug 27, 2025
Why I have problems connecting external devices via AV input on my Loewe Connect ID 55 DR+ TV?
- C
  Christopher AnthonyAug 28, 2025
  If you're experiencing issues connecting external devices to your Loewe TV via AV input, ensure the Signal type is correctly configured. Go to System settings ? Connections ? AV connection settings ? Signal type and adjust accordingly. If AV standard or Signal type is set to 'Automatic', it might cause incorrect detections with non-standard signals. In that case, manually set the standard and signal based on the external device's operating manual.
D
Dennis RosalesAug 30, 2025
What to do if my Loewe TV is not getting an IP address automatically?
- P
  Peter WilliamsAug 30, 2025
  If your Loewe TV isn't getting an IP address automatically, it might be because there's no DHCP server working on your network. To fix this, set up a DHCP server or manually assign IP addresses to your TV.
D
david63Sep 1, 2025
How to fix incorrect Teletext characters on my Loewe TV?
- D
  David AllenSep 1, 2025
  If Teletext characters are displaying incorrectly on your Loewe TV, the character set in the System settings might be wrong. To fix this, go to System settings ? Control ? more ... ? Standard Teletext ? Character set ? Standard, or select the appropriate character set.
E
Eduardo ParkerSep 3, 2025
What to do if errors occur when running a CA module on Loewe TV?
- T
  Tammy DanielSep 4, 2025
  To resolve errors when running a CA module on your Loewe TV, switch off the TV, remove the CA-module, wait a few seconds, reinsert it, and then switch the TV back on.
P
Pamela MurraySep 6, 2025
Why a programmed recording was not made on my Loewe TV?
- D
  Debra DavisSep 6, 2025
  If a programmed recording wasn't made on your Loewe TV, it could be because the provider deleted the program from the EPG data or the station doesn't support automatic time control. Note that only broadcasting organizations are responsible for transmitting data for the automatic time control and its availability cannot be guaranteed.
W
William HallSep 8, 2025
Why there is no start or end of programmed recording on Loewe Connect ID 55 DR+?
- B
  Brittany NorrisSep 8, 2025
  If there's no start or end to a programmed recording on your Loewe TV, even with automatic time control, it may be because the program's transmission time was delayed and the channel hasn't updated the data. Only broadcasting organizations are responsible for transmitting data for the automatic time control, and its availability cannot be guaranteed.