What does ERROR E-3 mean on Loewe Speaker System and how to fix it?
If you see ERROR E-3 on your Loewe Speaker System, it means that other operating processes were run on the unit during auto set-up. During auto set-up do not carry out any other operating processes.
What does ERROR E-9 mean on Loewe Individual Sound Projector and how to fix it?
If you see ERROR E-9 on your Loewe Speaker System, it means the auto set-up was cancelled by the user. Repeat auto set-up.
What does ERROR E-7 mean on Loewe Speaker System and how to fix it?
If you see ERROR E-7 on your Loewe Speaker System, it indicates that an internal system error has occurred. Repeat auto set-up.
General| Brand | Loewe |
|---|---|
| Model | Individual Sound Projector |
| Category | Speaker System |
| Language | English |
Explains core functions like power, input selection, volume, and navigation.
Details how to select sound modes and sound field programmes.
Details all audio, video, and system interface connection sockets on the rear panel.
Identifies and explains front panel controls, display, and indicators.
Lists included items and optional accessories for setup.
Provides details on environmental, power, unit, and battery information.
Covers safety, intended use, supervision, and cleaning instructions.
Explains user guide conventions and RS-232C interface details.
Provides guidelines for general unit placement and optimal room positioning for sound.
Describes various mounting options like wall, table, and floor stand.
Details how to connect the sound projector to different audio sources.
Step-by-step guide for connecting with Loewe TVs using RS-232C.
Guide for connecting with Loewe TVs lacking RS-232C interface.
Instructions for connecting other audio sources and accessories.
Covers mains connection, initial remote use, and mode adjustment.
Explains unit power management and the acoustic room calibration process.
Details how to connect and position the microphone for sound calibration.
Guides through the auto setup process for RS-232C compatible TVs.
Continues auto setup process, including examples of success and failure.
Guides auto setup for TVs without RS-232C interface, including language settings.
Covers TV audio output settings and user interface language selection.
Details the steps to start the automatic setup procedure.
Explains how to save and load custom sound configurations.
Covers selecting audio sources, volume control, and basic sound adjustments.
Describes how to recall saved listening position settings.
Details loading saved sound settings for non-RS-232C TV sets.
Explains the different surround sound modes available.
Details selecting input signals and understanding decoder status indicators.
Links surround modes to compatible signal sources and playback types.
How to achieve surround effects from 2-channel sources.
Adjusting parameters for Dolby Pro Logic II and DTS Neo:6.
Describes various pre-set sound field programmes for different scenarios.
Guides on selecting and activating sound field programmes.
Adjusting night mode for low-volume listening and compression levels.
Configuring bass enhancement and adjusting channel audio balance.
How to use the test sound for channel level calibration.
Explains sound menu options when connected to RS-232C TVs.
Details sound menu options for TVs without RS-232C interface.
Provides solutions for general operational issues and no-sound problems.
Lists common error messages during auto setup and their remedies.
Mentions advanced settings intended for technical personnel.
Details power, dimensions, amplifier, decoder, and speaker specifications.
Lists input/output ports and system interface details.
Includes masthead, VAT ID, and WEEE registration details.
Explains how to configure the remote for various Loewe devices.
Guides on using the remote to control the sound projector and TV.
Illustrates and explains the functions of all buttons on the remote.
Lists service contacts and addresses for various countries.
To Next Page
