How to display the on-screen dialogue (OSD) on Loewe Sound Projector SL Home Theater System?
If the on-screen dialogue (OSD) does not appear on your Loewe Home Theater System, connect the VIDEO OUT (Composite) socket on the unit to the input sockets on your TV set.
What does ERROR E-1 mean on a Loewe Sound Projector SL Home Theater System?
If ERROR E-1 appears on your Loewe Home Theater System, ensure that your listening room is as quiet as possible.
What does ERROR E-2 mean on a Loewe Home Theater System?
If ERROR E-2 appears on your Loewe Home Theater System, ensure the optimisation microphone is firmly connected to the unit.
What does ERROR E-3 mean on a Loewe Home Theater System?
If ERROR E-3 appears on your Loewe Home Theater System, do not carry out any other operating processes during auto set-up.
What does ERROR E-4 mean on a Loewe Sound Projector SL?
If ERROR E-4 appears on your Loewe Home Theater System, ensure the optimisation microphone is positioned in front of the unit.
What does ERROR E-5 mean on a Loewe Sound Projector SL?
If ERROR E-5 appears on your Loewe Home Theater System, ensure the optimisation microphone is more than 1.8 m from the front of the unit and within 1 m of the mid-height position of the unit.
What does ERROR E-6 mean on a Loewe Sound Projector SL?
If ERROR E-6 appears on your Loewe Home Theater System, ensure the optimisation microphone is firmly connected and set up properly. If the problem persists, contact your Loewe dealer.
What does ERROR E-7 mean on a Loewe Home Theater System?
If ERROR E-7 appears on your Loewe Home Theater System, repeat the auto set-up.
How to stop noise interference on Loewe Sound Projector SL without a subwoofer?
If you experience noise interference when no subwoofer is connected to your Loewe Home Theater System, reduce the volume or connect a subwoofer and configure the settings for it via the sound menu.
What to do if there is no sound from my Loewe Home Theater System?
If there is no sound from your Loewe Home Theater System, check the following: * Ensure all input or output cables are properly connected. If the problem continues, the cables may be faulty. * Select the correct input source using AUX (PIP) or SOURCE. * Increase the volume if it is set too low. * Deactivate mute by pressing or V + on the remote control, then adjust the volume.
Details all physical connection ports on the rear of the Sound Projector, including HDMI, AV, and digital audio.
Specifies the proper usage environment and conditions to prevent damage or hazards.
Covers warnings related to volume, supervision, cleaning, and protection from environmental factors.
Details connection possibilities, FM radio capabilities, and supported audio formats like Dolby and DTS.
Instructions on how to connect the Sound Projector to Loewe TV sets and other accessories.
Detailed steps for connecting the Sound Projector to a Loewe TV set using RS-232C, HDMI, and digital audio cables.
Instructions for connecting the Sound Projector and Mediacenter within the Loewe TV composite system.
Guide for connecting the Sound Projector to Loewe TV sets that lack the RJ-12/RS-232C system interface.
Guide to inserting batteries and setting up the Assist Remote Control for various Loewe devices.
Detailed instructions for assembling the microphone stand and placing it for room calibration.
Explains the process of measuring the room and optimizing sound beams with the microphone.
Steps to initiate and configure auto setup for Loewe TVs with RJ-12/RS-232C interface.
Information on successful and failed auto setup results, including error message explanations.
Steps to configure TV settings like audio output and language for auto setup.
Solutions for issues like unit not working, switching to standby, or general operational failures.
Addresses issues related to no sound, specific channel sound absence, and unsatisfactory surround effects.
Detailed causes and remedies for various error messages encountered during the auto setup process.
Details all physical connection ports on the rear of the Sound Projector, including HDMI, AV, and digital audio.
Specifies the proper usage environment and conditions to prevent damage or hazards.
Covers warnings related to volume, supervision, cleaning, and protection from environmental factors.
Details connection possibilities, FM radio capabilities, and supported audio formats like Dolby and DTS.
Instructions on how to connect the Sound Projector to Loewe TV sets and other accessories.
Detailed steps for connecting the Sound Projector to a Loewe TV set using RS-232C, HDMI, and digital audio cables.
Instructions for connecting the Sound Projector and Mediacenter within the Loewe TV composite system.
Guide for connecting the Sound Projector to Loewe TV sets that lack the RJ-12/RS-232C system interface.
Guide to inserting batteries and setting up the Assist Remote Control for various Loewe devices.
Detailed instructions for assembling the microphone stand and placing it for room calibration.
Explains the process of measuring the room and optimizing sound beams with the microphone.
Steps to initiate and configure auto setup for Loewe TVs with RJ-12/RS-232C interface.
Information on successful and failed auto setup results, including error message explanations.
Steps to configure TV settings like audio output and language for auto setup.
Solutions for issues like unit not working, switching to standby, or general operational failures.
Addresses issues related to no sound, specific channel sound absence, and unsatisfactory surround effects.
Detailed causes and remedies for various error messages encountered during the auto setup process.
General| Brand | Loewe |
|---|---|
| Category | Home Theater System |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| HDMI Inputs | 3 |
| Bluetooth | Yes |
| Wi-Fi | Yes |
| Connectivity | HDMI |
| Dimensions | 120 cm x 16 cm x 6.8 cm |
| HDMI Outputs | 1 |
| Model | Sound Projector SL |
To Next Page