To Next Page
L
Linda JenkinsSep 7, 2025
What does ERROR E-7 mean on a Loewe Home Theater System?
- BbauerjosephSep 7, 2025
If ERROR E-7 appears on your Loewe Home Theater System, repeat the auto set-up.
What does ERROR E-7 mean on a Loewe Home Theater System?
If ERROR E-7 appears on your Loewe Home Theater System, repeat the auto set-up.
What does ERROR E-6 mean on a Loewe Sound Projector SL?
If ERROR E-6 appears on your Loewe Home Theater System, ensure the optimisation microphone is firmly connected and set up properly. If the problem persists, contact your Loewe dealer.
What does ERROR E-5 mean on a Loewe Sound Projector SL?
If ERROR E-5 appears on your Loewe Home Theater System, ensure the optimisation microphone is more than 1.8 m from the front of the unit and within 1 m of the mid-height position of the unit.
What does ERROR E-4 mean on a Loewe Sound Projector SL?
If ERROR E-4 appears on your Loewe Home Theater System, ensure the optimisation microphone is positioned in front of the unit.
What does ERROR E-3 mean on a Loewe Home Theater System?
If ERROR E-3 appears on your Loewe Home Theater System, do not carry out any other operating processes during auto set-up.
General| Brand | Loewe |
|---|---|
| Category | Home Theater System |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| HDMI Inputs | 3 |
| Bluetooth | Yes |
| Wi-Fi | Yes |
| Connectivity | HDMI |
| Dimensions | 120 cm x 16 cm x 6.8 cm |
| HDMI Outputs | 1 |
| Model | Sound Projector SL |
Details all physical connection ports on the rear of the Sound Projector, including HDMI, AV, and digital audio.
Specifies the proper usage environment and conditions to prevent damage or hazards.
Covers warnings related to volume, supervision, cleaning, and protection from environmental factors.
Details connection possibilities, FM radio capabilities, and supported audio formats like Dolby and DTS.
Instructions on how to connect the Sound Projector to Loewe TV sets and other accessories.
Detailed steps for connecting the Sound Projector to a Loewe TV set using RS-232C, HDMI, and digital audio cables.
Instructions for connecting the Sound Projector and Mediacenter within the Loewe TV composite system.
Guide for connecting the Sound Projector to Loewe TV sets that lack the RJ-12/RS-232C system interface.
Guide to inserting batteries and setting up the Assist Remote Control for various Loewe devices.
Detailed instructions for assembling the microphone stand and placing it for room calibration.
Explains the process of measuring the room and optimizing sound beams with the microphone.
Steps to initiate and configure auto setup for Loewe TVs with RJ-12/RS-232C interface.
Information on successful and failed auto setup results, including error message explanations.
Steps to configure TV settings like audio output and language for auto setup.
Solutions for issues like unit not working, switching to standby, or general operational failures.
Addresses issues related to no sound, specific channel sound absence, and unsatisfactory surround effects.
Detailed causes and remedies for various error messages encountered during the auto setup process.