MORE USE OF LIGHT
❶
LIGHT BREAKER ALARM
You will need a flashlight to make the light
breaker alarm. Find a dark spot or wait
until the light is fading.
Step 1
Plug the Logiblocs together as
shown and stand them
up on the BATTERY
BOX.
Step 2
Place your flashlight so that it shines
across the doorway straight at the lens
of the LIGHT SWITCH.
You have now made a Light Breaker
Alarm. When the light beam is broken
by walking through the beam, your
message will play back.
Why not try using mirrors to bend the
light beam around corners. Make sure
that the beam still reaches the LIGHT
SWITCH.
Don’t forget to disconnect the BATTERY BOX when you are not using
the Logiblocs to make the batteries last as long as possible!
16
To Next Page
Loading...
