LET’S GET STARTED
The first thing to do is to get to know the Logiblocs and make sure
that they are working OK.
You will need four 1.5V AA size batteries.
Step 1
Open the BATTERY BOX and put
the batteries in. See the section on
battery installation near the end of
this booklet.
Step 2
Plug in the BATTERY BOX
to the CROSS
Step 3
Plug in the BUTTON.
When you press it the light on
the CROSS should come on.
If this doesn’t happen,
check that the batteries
are put in correctly.
If you still have trouble,
maybe your batteries are flat!
BATTERY
PACK
CROSS
BUTTON
7
To Next Page
Loading...