Need help?Do you have a question about the LOGICDATA COSMO Austin and is the answer not in the manual?
General| Input Voltage | 100-240 VAC |
|---|---|
| Output Voltage | 24 VDC |
| Height Adjustment | Electric |
| Noise Level | < 50 dB |
| Warranty | 5 years |
| Number of Drives | 2 |
| Bluetooth | Yes |
| Material | Steel |
| Load Capacity | 120 kg |
Provides essential safety guidelines for users of the adjustable bed frame.
Lists general safety regulations and obligations for system handling and operation.
Describes the adjustable bed frame's sole intended use, including indoor and household limitations.
Clarifies that the bed frame is not designed for medical or hospital standards.
Lists common ways the adjustable bed frame might be misused, such as climbing or overloading.
Informs about the bed frame's auto-timeout feature due to continuous use and restart.
Defines the intended users of the manual based on technical knowledge and physical ability.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE signal words used in the manual.
Details residual risks that remain after all relevant safety standards have been complied with.
Instructions to reduce the risk of electric shock, including unplugging before cleaning.
Warnings about burns, fire, electric shock, and injury to persons during operation or assembly.
Warnings about moderate risks of death or serious injury from overloading the bed frame.
Risks associated with modifying electrical or mechanical components, potentially causing serious injury.
Dangers of crawling, laying, or reaching underneath the bed frame leading to crushing injuries.
Risks of operating the adjustable bed frame in potentially explosive atmospheres.
Risks of crushing between the bed frame and foreign objects due to obstructed movement.
Risks of misuse of the bed frame around children, leading to serious injury or death.
Introduces the manual's purpose, emphasizing comfort, safety, and compliance.
Outlines LOGICDATA's liability limitations for damage or injury caused by product misuse.
Provides the FCC statement and details the product's compliance with FCC CFR 47 Part 15.
Explains servicing requirements and precautions for double-insulated products.
Lists necessary tools and equipment, recommending two adults for assembly.
Provides instructions and warnings for safely unpacking the bed frame components.
Instructions for preparing and laying out the outer frame components, including crossbars and side rails.
Step-by-step guide for attaching the legs to the side rails, ensuring hand-tight fit.
Instructions for connecting the crossbars to the side rails using crossbar knobs.
Warnings regarding crushing injuries while connecting parts, especially moving parts of side rails.
Guide for connecting the motor cables to the control box and the power converter cable.
Instructions for mounting the base platform onto the bed frame, securing it with screws.
Guide for attaching the head, foot, and inner platforms to the side rails.
Instructions for installing the retainer bar at the foot of the bed to secure the mattress.
Details on connecting the power converter to the mains and bed frame for operation.
Instructions for inserting batteries into the remote control for wireless operation.
Explains the functions of the remote control buttons for bed frame adjustment.
Warning about potential system damage from rapid, successive button presses on the remote.
Safety precautions for children using the remote control to prevent injury.
Precautions when operating multiple bed frames with one remote to avoid unintended movement.
Step-by-step guide to pair the remote control with the adjustable bed frame.
Instructions to unpair the remote control from the bed frame for security.
How to perform a reference drive for initial setup and calibration of the bed frame.
Instructions on how to move the bed frame platforms up and down using the remote.
How to save custom memory positions using the remote control's memory buttons.
Steps to perform a factory reset, returning the bed frame to its default state.
How to move the bed frame to a previously saved memory position using the remote.
Instructions to move the bed frame to its lowest, flat sleeping position.
How to activate and deactivate the child lock feature on the remote control.
Procedure to reset the bed frame to a flat position, ensuring proper alignment.
Explains how to control two bed frames simultaneously using one remote control.
How to operate both bed frames simultaneously when they are connected in sync mode.
Steps to correct misalignment between two connected bed frames.
Instructions on how to disassemble the adjustable bed frame by reversing assembly steps.
Guidelines for safely moving and transporting the bed frame, requiring two people.
How to clean the adjustable bed frame safely using a dry or slightly damp lint-free cloth.
Warnings about electric shocks during cleaning if the bed frame is plugged in.
Advice on suitable cleaning agents for the bed frame to avoid damaging its finish.
Information on the bed frame's minimal maintenance requirements and contact for issues.
Possible causes and solutions when the bed frame buttons are unresponsive.
Procedure for emergency lowering of the bed frame using backup batteries after a power failure.
Notes on emergency lowering for multiple bed frames when connected via sync cable.
Reasons and solutions for uneven bed frame movement, including misalignment.
Explains system status codes indicated by control box clicks after startup or shutdown.
Lists technical specifications like input voltage, current, suitable mattress sizes, and maximum load.
Note on how input voltage affects the maximum load capacity of the bed frame.
Guidelines for proper disposal of the product according to local regulations and environmental responsibility.
To Next Page
