Need help?Do you have a question about the LOGICDATA SILVERlite and is the answer not in the manual?
General| Height adjustment range | 650 mm - 1250 mm |
|---|---|
| Speed | 38 mm/s |
| Input Voltage | 100-240 V AC |
| Output Voltage | 24 V DC |
| Standby Power Consumption | <0.1 W |
| Protection Class | IP20 |
| Noise Level | <50 dB |
| Storage Temperature | -20°C to +60°C |
| Control | Handset |
| Safety Standard | EN 60335-1 |
| Operating Temperature | 0°C to 40°C |
| Warranty | 5 years |
| Transformer Type | Built-in switching power supply |
| Power Supply | Integrated power supply unit |
General safety instructions and responsibilities for users.
Regulations and obligations for safe system handling.
Defines the product's sole intended use and limitations.
States the product is not for medical use and lists related warnings.
Lists common ways the bed frame might be misused.
Warns about continuous operation limits and time-outs.
Describes the intended user profile for the manual.
Explains the meaning of the 'DANGER' signal word.
Explains the meaning of the 'WARNING' signal word.
Explains the meaning of the 'CAUTION' signal word.
Explains the meaning of the 'NOTICE' signal word.
Instructions to reduce the risk of electric shock.
Instructions to reduce risks of burns, fire, electric shock, or injury.
Warns about exceeding weight limits and misuse.
Warns against modifying electrical/mechanical components.
Warns about reaching under the bed frame.
Warns against use in potentially explosive atmospheres.
Warns about crushing hazards due to movement.
Warns about child safety and misuse.
Introduces the manual's purpose and safety importance.
Directs users to page 2 for contact information.
Outlines LOGICDATA's liability limitations.
States compliance with FCC rules and conditions.
Provides instructions for proper electrical grounding.
Lists all parts included in the package.
Details tools and personnel needed for assembly.
Provides instructions for safely unpacking the product.
Step-by-step guide to attaching the legs.
Instructions for preparing the outer frame components.
Instructions for connecting the crossbars and side rails.
Guide for connecting the motor and power converter cables.
Instructions for mounting the base platform.
Instructions for mounting the head, foot, and inner platforms.
Guide for attaching the retainer bar.
Instructions for connecting the main power cable.
Guide for inserting batteries into the remote control.
Steps to disassemble the bed frame.
Guidelines for safely moving the assembled bed frame.
Overview of the remote control functions and buttons.
Instructions for pairing the remote control with the bed frame.
Steps to unpair the remote control.
How to operate the up/down functions of the platforms.
Instructions for saving custom memory positions.
How to perform a flat position reset.
How to enable and disable the child lock feature.
Explains Wireless Sync Mode for controlling two beds.
Step-by-step guide to activate Wireless Sync Mode.
Steps to deactivate Wireless Sync Mode.
How to fix misalignment between two beds.
Instructions for cleaning the adjustable bed frame.
Information on product maintenance requirements.
Possible causes and solutions for remote control issues.
Procedures for emergency lowering after power failure.
Actions to take if the remote is defective or lost.
Troubleshooting uneven movement and misalignment.
Specifications including voltage, current, dimensions, and load.
Guidelines for environmentally responsible product disposal.
To Next Page
