16 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
1.
Turn over the Base Plat-
form (H) and lay it at
across the center of the
Bed Frame. The Net
should face downwards.
2.
Ensure that the Platform
is correctly positioned.
There should be 3 Mount-
ing Holes on each Side
Rail (A, B) either side of
the Platform.
3. Use 4 Platform Screws (N)
to x the Platform by hand.
Turn each screw until it is
hand-tight.
H
A
B
N
STEP 5: MOUNTING THE BASE PLATFORM
1.
Lay the Base Platform
(H) upside down across
the Bed Frame. The Net
should face upwards.
2.
Lay the Control Box (I) in
-
side the Net on the Base
Platform.
H
I
4x
CAUTION
Risk of minor or moderate injury through tripping
While mounting the Platforms, you may have to step over the Power Cable. Tripping over the
Cable may lead to injury.
• Be careful not to trip over the Cable
To Next Page
Loading...
Need help?
General
