19ADJUSTABLE BED FRAME - OWNER’S MANUAL //
DISASSEMBLY
To disassemble the Adjustable Bed Frame, you must rst disconnect the Bed Frame from the
mains. Then, follow the assembly instructions in reverse order. To minimize the risk of pinching
when transporting the Side Rails, secure all moving parts with packaging tape.
5. DISASSEMBLY AND
TRANSPORTATION
TRANSPORTATION
After it has been fully assembled, the Bed Frame should only be moved short distances within
the same room. Lifting the Bed Frame requires two people. To lift the Bed Frame:
1. Ensure that the Bed Frame has rst been moved to the Sleeping Position.
2. Stand at opposite sides of the Bed Frame (long sides) and grip the Base Platform.
NOTICE
Moving the Bed Frame on its side or upside down may lead to damage to the product.
• Only move the Bed Frame while it is in horizontal position (Platforms facing upwards)
• Disassemble the Bed Frame before moving it to a dierent location
CAUTION
Risk of minor or moderate injury through crushing
Tilting the Bed Frame when lifting or moving the Adjustable Bed Frame may lead to minor or
moderate injury through crushing.
• Keep the Bed Frame level while lifting or moving it
• Do not attempt to lift or move the Bed Frame alone
To Next Page
Loading...
Need help?
General
