Logik L20GSS11 User Manual

12
Clock Setting
When the microwave is connected to the mains power, the LED display will show ”0:00” and the microwave
will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the Clock/Pre-Set button and the hour
digits will flash.
2. Turn the Time/Weight/Auto Menu dial to
adjust the hour digits. The input time has to
be within 0-23.
3. Press the Clock/Pre-Set button and the
minute digits will flash.
4. Turn the Time/Weight/Auto Menu dial to
adjust the minute digits. The input time has to
be within 0-59.
5. Press the Clock/Pre-Set button again to
complete the clock setting.
“:” will start flashing and the time will
illuminate to confirm that the clock setting is
complete.
• This is a 24-hour clock. When the
microwave is connected to the mains
power for the first time or when
the power is resumed after a power
interruption, the LED display will show
”0:00”. To re-set the clock, simply follow
the above 5 steps.
• In the process of clock setting, if the
Stop/Clear button is pressed or if there
is no operation within 1 minute, the
microwave will go back to the previous
status automatically.
• If the clock needs to be reset, please
repeat steps 1 to 5.
• To find out the current time while the
microwave is operating, press the Clock/
Pre-Set button. It will last for 2-3 seconds
and then return to its original display.
Micro./
Grill/Combi.
Weight/
Time Defrost
Start/
+30Sec./Conrm
Clock/Pre-Set Stop/Clear
T
i
m
e
W
e
i
g
h
t
A
u
t
o
M
e
n
u
1, 3,
5
2, 4

Logik L20GSS11 Specifications

General

Brand	Logik
Model	L20GSS11
Category	Microwave Oven
Language	English