EasyManuals Logo

Logik L20GSS11 User Manual

Logik L20GSS11
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
Delay Start Cooking (Programme Set in Advance)
For Delay Start Cooking, please follow the steps below.
For instance: The current time is 12 oclock (noon) and you want to cook with 80% microwave power for 5
minutes at 1:30 oclock in the afternoon.
Do not press the Start/+30Sec./Confirm
button at this stage.
• You can set a maximum of 2 stages for Delay Start Cooking. Defrosting cannot be set as one of
those stages.
• Ensure the door is closed prior to setting the programme.
• Ensure that the clock has been set correctly before using Delay Start Cooking.
1. Press the Micro./Grill/Combi. button once
and the LED display will show ”P100. Press the
Micro./Grill/Combi. button repeatedly until the
LED display shows P80.
2. Press the Start/+30Sec./Confirm button to
confirm the microwave power level.
3. Turn the Time/Weight/Auto Menu dial clockwise
to adjust the cooking time until the LED display
shows 5:00.
4. Press the Clock/Pre-Set button to preset the
starting time for the cooking. The hour digits will
flash first. Turn the Time/Weight/Auto Menu dial
clockwise to adjust the starting time until the LED
display shows 13:00.
5. Press the Clock/Pre-Set. button again to preset
the starting time for the cooking. The minute
digits will flash first. Turn the Time/Weight/Auto
Menu dial clockwise to adjust the starting time
until the LED display shows 13:30.
6. Press the Start/+30Sec./Confirm button to
complete the setting. The microwave will sound
when the count down reaches the starting time
and cooking will start automatically.
7. Press the Stop/Clear button to pause the cooking.
Press the Stop/Clear button again to cancel the
setting.
Micro./
Grill/Combi.
Weight/
Time Defrost
Start/
+30Sec./Conrm
Clock/Pre-Set Stop/Clear
T
i
m
e
W
e
i
g
h
t
A
u
t
o
M
e
n
u
1
4, 5
1, 3,
4, 5
2, 6
7
Alternatively, after you press the Micro./
Grill/Combi. button once, you can turn the
Time/Weight/Auto Menu dial until the LED
display shows P80.
To find out the preset time, press the
Clock/Pre-Set button once while the
microwave is still in the preset state. It
will last for 2-3 seconds and then return
to its original display.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik L20GSS11 and is the answer not in the manual?

Logik L20GSS11 Specifications

General IconGeneral
BrandLogik
ModelL20GSS11
CategoryMicrowave Oven
LanguageEnglish

Related product manuals