11
4, 6
5
5
Checking your Microwave
Check your microwave after unpacking.
For your safety, the microwave stops
if the door is opened during cooking.
Close the door and press the Start
button to continue the cooking cycle.
1. Press the Door Open button to open the door.
2. Place a cup of water on the glass turntable
plate. Make sure the cup is microwave safe (it
should not have any decorative metal trim).
3. Close the door.
4. Press the Stop/Clear button to clear any
settings that have already been made.
5. Press the Quick Start button twice and
then press the Start button to start a simple
30-second microwave cooking cycle. This
allows you to check the operation of the
microwave.
6. When the cooking cycle has finished, the
water should be hot (be careful when you take
the cup out of the microwave).
Press the Stop/Clear button to clear any
settings.
L20MS10_IB_final110113.indd 11 13/01/2011 9:54 AM
To Next Page
Loading...
Need help?
General
