Logik L20MS10 User Manual

16
Delay Start Cooking (Programme Set in Advance)
For Delay Start Cooking, follow the steps below.
For instance: The current time is 12 o’clock (noon) and you want to cook with 80% microwave power for 5
minutes in 1 hour and 30 minutes time.
• You can set a maximum of 2 stages for Delay Start Cooking. Defrosting cannot be set as one of
those stages.
• Ensure the door is closed prior to setting the programme.
• Ensure that the clock has been set correctly before using Delay Start Cooking.
1. Press the Microwave button once and then
select the 80% microwave power by pressing
“8”. The LED display will show “P8 “.
2. Press the Time button once and then enter
the cooking time by pressing “5“, “0“, “0“. The
LED display will show ”5:00”.
3. Press the Preset button to preset the starting
time for the cooking. The LED display will
show ”: 0”.
4. Enter the time by pressing “1“, “3“, “0“. The LED
display will show ”1:30”.
5. Press the Start button to complete the setting,
and the will flash. The microwave will
sound 3 times when the count down reaches
the starting time and cooking will start
automatically.
6. Press the Stop/Clear button to cancel the
setting.
Do not press the Start button at this stage.
1, 2, 4
1
5
6
3
2
To find out the preset time, press the Preset
button once while the microwave is still in
the preset state. It will last for 2-3 seconds
and then return to its original display.
L20MS10_IB_final110113.indd 16 13/01/2011 9:54 AM

Logik L20MS10 Specifications

General

Brand	Logik
Model	L20MS10
Category	Microwave Oven
Language	English