Using the DVD Dolby Digital Setup Page
In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the Digital Setup menu,
and the
buttons to select the menu options. Press the DVD Setup button to exit the menu.
In Setup mode, the disc playback function will not be available.
Option Description
DYNAMIC RANGE When the dynamic range is set to FULL, the audio level
during quiet and loud parts of the movie will be automatically
adjusted.
This setting is used to play Dolby Digital encoded
discs. Best used for night time viewing.
DUAL MONO STEREO
The player will output both left channel and right channel
audio.
MONO L
It means that the player will output left channel audio only.
MONO R
The player will output right channel audio only.
MIX MONO
The player will output the average signal of the left channel
and right channel audio.
This setting is used to play Dolby AC-3 encoded 2
channel discs. This setting may not be adjustable for
some discs.
Using the DVD Speaker Setup Page
In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the Speaker Setup menu,
and the
buttons to select the menu options. Press the DVD Setup button to exit the menu.
In Setup mode, the disc playback function will not be available.
Option Description
AUDIO OUT LT/RT
Select this option when the DVD player is connected to an
external amplifier with Pro-Logic decoding function.
STEREO
Press the
button to select STEREO and then press the OK
button to confirm.
VSS
Press the
button to select VSS (Virtual Surround Sound) and
then press the OK button to confirm.
To Next Page
Loading...
Need help?
General
