18
Connecting Headphones
Connect your headphones to the TV’s HEADPHONE
socket.
Before putting on the headphones, turn the volume
down then put the headphones on and slowly
increase the volume until you reach a comfortable
listening level.
Rear Right Side View of TV
USB HDMI2 HDMI1 PC IN RF
COMMON INTERFACE (CI)
HEADPHONE PC AUDIO
Earphones Cable
(not included)
Long-term exposure to loud music may
cause hearing damage. It is best to avoid
extreme volume when using headphones,
especially for extended periods.
The TV’s volume will not be affected. You may
control the audio level via the Audio Receiver.
Connecting a Coaxial Audio Receiver
For better sound quality, you may want to play the audio through your multi-channel audio receiver.
1. Use an audio cable (not included) to connect the
TV’s SPDIF OUT output socket to an external audio
receiver’s audio coaxial input socket.
2. Plug the connected devices into the mains socket
before switching on the TV.
3. Press the
button on the right side panel of the
TV or on the remote control to turn on your TV.
4. Press the
button on the right side panel of the
TV or the INPUT button on the remote control
to display the Source List. Use the
buttons
on the remote control to select any desired input
source and then press the OK button to confirm.
Audio Receiver
Y Pb Pr
RLVIDEO
SCART
SPDIF OUT
Rear Right Bottom View of TV
Audio Cable
(not included)
L22_24FED13_IB_RC131024_Annie.indd 18 24/10/13 5:38 PM
To Next Page
Loading...
Need help?
General
