Recording DTV Programme onto a USB Storage Device
Use this function to record the DTV programme you are watching on the main screen and save it for future viewing.
The recording from timer programme or direct recording may have a little bit of delay when it starts to record the broadcast
programme.
Please make sure the USB device is inserted. If not, a warning message will pop up.
1. Press the
REC button to record the programme that you are currently
watching.
2. Press the
REC button again, the recording progress bar will disappear.
3. Press the
Stop button to stop recording.
Recording will stop automatically when the disk is full.
If you want to turn off your TV during recording, press the button. A dialogue will display.
Press the
buttons to select your desired option and then press the OK button to confirm.
If you select the middle option in the box, the screen will turn off but the recording will still in progress, the LED
indicator will alternatively flash red and blue.
The recording is still in progress.
Do you want to switch off the TV?
Yes, Stop recording and switch off the TV.
Yes, turn off the screen and sound,
but keep recording the programme.
No
L22_24FE12_IB_Running Change_120907_Annie.indd 47 12年9月7日 上午10:44
To Next Page
Loading...
Need help?
General
