Logik L612WSM16E User Manual

28
GB
90°C
60 min
60°C
40°C
Eco 20°C
3h
60°
40°
30°
6h
9h
12h
No Spin Button
Select if you don’t
want your washing
machine to spin at the
end of a wash cycle.
Rapid Wash
Button
Press to select the
a rapid wash. This
function will wash in
a shorter time saving
water and energy.
Child Lock Buttons
Press and hold the Rapid Wash and No Spin
buttons together for 3 seconds the indicator
LEDs will ash to show the Child lock is set.
Temperature
Button
Press to change
the program
temperature. You
can only select
a temperature
lower than the
selected program
(If no temperature
indicator is lit, the
water temperature
is as per program
selected)
Start/Pause
Button
Press to start your
wash. Press while
in operation to
pause your wash.
Delay Button
This button is used
to delay the wash.
The delay can be
set to 3, 6, 9 or 12
hours.
The Control Panel
Programme Dial
Dierent wash programmes can
be selected according to your
wash requirements. See ‘Selecting
the Programme’ for details
Display
LED indicators show the
wash progress, delay time,
temperature and Child lock.
During initial start-up and use of the unit, there may be a slight smell
while the motor is settling in. This is not a fault; this is normal operation.
• If you need to change a programme after the wash has started, turn the the
programme dial to the off position (O) then select a new programme, spin speed
and optional functions, and then press the Start / Pause button. (Ensure the Child
Lock is off, otherwise the original programme will continue.)
• Water is poured into the washing machine to perform an inspection at the time of
shipment from the factory, so there may be drops of water or condensation in the
washing machine. This is not an indication of a malfunction.
L612WSM16E_IB.indb 28 21/03/2016 16:04

Logik L612WSM16E Specifications

General

Brand	Logik
Model	L612WSM16E
Category	Washer
Language	English