9
INSTALLATION
GB
6. The condensation strip must be fitted to
the underside of the worktop above your
dishwasher to protect it against any moisture.
Its purpose is to protect your worktop’s
underside from steam rising from the
dishwasher.
• Ensure the surface is clean prior to sticking
the condensation strip to the underside of
the worktop.
• Remove the backing paper from the
condensation strip.
Failure to attach the condensation strip
could result in damage to the underside
of your worktop!
Leave some space
Stick the Condensation Strip
under the worktop, where you
want to install the dishwasher.
• Stick the condensation strip to the
underside of the worktop.
7. Position the dishwasher next to a water tap
and a drain. Ensure the water inlet and drain
hoses are not kinked or squashed. The unit
must not stand on the mains cable.
To Next Page
Loading...
