20
INSTALLATION
GB
6. Position the dishwasher next to a water tap and
a drain. Ensure the water inlet and drain hoses
are not kinked or squashed. The unit must not
stand on the mains cable.
7. Good levelling is essential for correct closure and
sealing of the door. When the unit is correctly
levelled, the door should not catch the inner
liner on either side of the cabinet. Adjust the
adjustable feet to obtain the optimum levelling
of the unit.
8. Unscrew the two screws and adjust the distance
of left and right plinth tab to your need. The
adjustable range is from 39mm to 134mm.
Power
Delay
Start
1/2 Load
3in1 Inten Normal Eco 1 Hour Glass Rapid
3
in
1
39
134
screw
To Next Page
Loading...
Need help?
General
