8
10. To secure the dishwasher under the table
top, tighten the screws as shown.
Synthetic / Ceramic Worktop
ST4x30
Hole
Cover
11. Cut out a 598 mm wide plinth for toe
panel. Tape the supplied toe panel
mounting brackets to the toe panel as
shown. Drill the required holes.
598
560.4
36
56.2
100
12. Determine the correct position for the
toe panel mounting bracket, remove
the bracket and bend the metal tab. This
ensures that the toe panel won’t slide in
further than you need.
13. Attach the toe panel mounting brackets to
the toe panel. Align the screw holes, then
use 4 screws of ST4x14 to secure the toe
panel.
LID60W20_IB_RC_Final210603.indd 8LID60W20_IB_RC_Final210603.indd 8 3/6/2021 5:42 PM3/6/2021 5:42 PM
To Next Page
Loading...
Need help?
General
