Logitech G Flight Yoke System User Manual

7 English
Now, connect the Throttle Quadrant to the Flight Yoke with the
PS/2 connector provided. Your Throttle Quadrant comes supplied
with additional lever knobs to congure any combination of throttle,
aps, mixture or prop pitch and you can also buy additional
quadrants to link together for more complex multi-engined aeroplane
congurations.
Use the integrated USB Hub on the side of the Flight Yoke to easily connect other
parts of the Logitech G Flight range of products, such as additional Flight Throttle
Quadrants, Flight Rudder Pedals, or other peripherals.
INSTALLATION FOR WINDOWS
®
10, WINDOWS
®
8.1
ANDWINDOWS
®
7
DRIVER INSTALLATION
1 Visit logitech.com/support/yoke to download the latest drivers and software
for your operating system.
2 With device disconnected, follow the onscreen instructions to complete the
installation.
3 At the Driver Setup screen, only when prompted, insert USB cable into one of
your computer’s USB ports, then click Next.
4 At the Driver Setup screen, click Next to test your controller.
5 Follow the on screen prompts to test the controls and verify device operation.
After the test, click OK.

Logitech G Flight Yoke System Specifications

General

Connection Type	USB
Category	Flight Simulation Controls
Compatibility	PC
Button Configuration	Programmable buttons
POV Hat Switch	Yes
Mounting Options	Desk clamp