Logitech A50 - Page 21

21 ENGLISH
4.8 Docking and Charging
The A50 requires a dedicated external power source. Please use the included AC adapter with the product.
The A50 headset is designed to be docked and charge on the Base Station when not in use. This ensures the headset is
suciently charged and ready for the next session. Aer each session, we recommend docking the headset to the Base
Station. Alternatively, the headset includes a USB-C port (located on the right ear) to allow for wired charging during use or
quick top os.
Use
Before docking, make sure the headset is in the correct orientation; the boom mic should be on the le-hand side
andthe button controls should be facing you.
Make sure to ip the boom mic to the up (muted) position and the ear cups are not rotated or ipped inwards
towardsyou.
1
2
3
4
Gently place the headset on the Base Station, doing so will allow the headset to properly align with the charging pins.
The Base Station has 4 LEDs indicating the headset’s battery state of charge, in 25% increments.
5
The headset has one LED integrated into the power switch:
• Power On / Battery Full: White.
• Sleep Mode: Breathing White.
• Battery Charging: Orange.
• Battery Low: Steady Red.
• Battery Critical (less than 15 minutes playtime remaining): Breathing Red.