Logitech C930e

SETTING UP THE WEBCAM
For placement on a monitor
1 Place your webcam on a computer, laptop or monitor
at a position or angle you desire.
For placement on a tripod*
1 Locate the ¼ inch tripod thread on the bottom ofthe
universal mounting clip.
2 Adjust the webcam to make sure the foot on
theuniversal mounting clip is ush with the back
ofyour device.
3 Manually adjust the webcam up/down to the best
position to frame yourself.
2 Secure the webcam on your tripod by twisting it
intothe ¼ inch thread.
3 Place your webcam with the tripod anywhere
youdesire to the best position to frame yourself.
* Tripod not included
5 English
CONNECTING THE WEBCAM VIA USB-A
Plug the USB-A connector into the USB-A port
onyourcomputer.
SUCCESSFUL CONNECTION
LED activity light will light up when the webcam
isinuseby an application.
INCLUDING FIXED MOUNTING CLIP:
Height x Width x Depth:
1.70 in (43.3 mm) x 3.70 in (94 mm) x 2.80 in (71 mm)
Cable Length: 5 ft (1.5 m)
Weight: 5.71 oz (162 g)
DIMENSIONS
www.logitech.com/support/C930e
© 2021 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech
Europe S.A. and/or its aliates in the U.S. and other countries. Logitech assumes noresponsibility
for any errors that may appear in thismanual. Information contained herein issubject to change
without notice.