Need help?Do you have a question about the Logitech G713 and is the answer not in the manual?
Remove the LIGHTSPEED receiver from the storage slot before proceeding with setup.
Insert the LIGHTSPEED receiver, with its extender and cable, into a PC USB port for connection.
Turn on the keyboard by sliding the power button; the connection button will illuminate cyan.
Download and install G HUB software from www.logitech.com/ghub for optimal gaming experience.
Turn on the keyboard by sliding the power button to enable Bluetooth connectivity.
Press the connection button to cycle to Bluetooth; light flashes blue, then follow device pairing instructions.
Insert the USB-C cable into the port located at the front of the keyboard.
Connect the other end of the USB-C cable to your PC to begin charging the keyboard.
General| Connection Type | Wired |
|---|---|
| USB Passthrough | No |
| Media Controls | Yes |
| Keycap Material | ABS |
| Connectivity | USB |
| Backlighting | RGB |
| Dimensions | 370.6 mm x 157 mm x 37.2 mm |
| Cable | USB-C |
| Compatibility | Windows, macOS |
| Key Rollover | N-key rollover |
To Next Page
