Need help?Do you have a question about the Logitech Mobile Speakerphone P710e and is the answer not in the manual?
General| Auto | No |
|---|---|
| Device type | Mobile phone |
| Product color | Black |
| Mac operating systems supported | Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey |
| Linux operating systems supported | Yes |
| Windows operating systems supported | Windows 10, Windows 11, Windows 7, Windows 8, Windows 8.1, Windows Vista |
| Microphone frequency | 50 - 8000 Hz |
| Microphone direction type | Omnidirectional |
| Sensitivity | 85 dB |
| Frequency range | 140 - 16000 Hz |
| Interface | USB/Bluetooth |
| Headphone connectivity | 3.5 mm |
| Connectivity technology | Wired & Wireless |
| Package depth | 189 mm |
| Package width | 149 mm |
| Package height | 57 mm |
| Package weight | 574 g |
| Master (outer) case width | 199 mm |
| Master (outer) case height | 301 mm |
| Master (outer) case length | 311 mm |
| Master (outer) case weight | 6200 g |
| Harmonized System (HS) code | 85182900 |
| Battery capacity | 1100 mAh |
| Power source type | Battery |
| Number of batteries supported | 1 |
Weight and Dimensions| Width | 120 mm |
|---|---|
| Height | 40 mm |
| Weight | 275 g |
Powers on or off the P710e.
Pair the P710e with Bluetooth devices by holding the button until blue lights appear.
Shows battery status: green for full, red for low battery, flashing red for charging.
Press to answer incoming calls.
Press to end a call or reject an incoming call.
Press to increase the speaker volume.
Press to decrease the speaker volume.
Press to mute or unmute the microphone.
Place your mobile device's NFC antenna here to pair or disconnect.
Provides talk time estimates for 15 min, 1.5 hr, and 3 hr charges using AC adapter.
Top slides back to reveal a stand for mobile devices, useful for video conferences.
Inserts adjust the stand for different mobile device sizes (0-8.5mm and 8.5-10.5mm).
Connect the P710e to a PC or AC outlet for initial use.
Connect via USB cable and ensure P710e is the default audio device in OS settings.
Power on, pair mobile devices via Bluetooth, or use NFC for quick pairing/disconnect.
Check USB connection, pairing, volume levels, and ensure P710e is default audio device.
Guides for setting P710e as default audio device on Windows Vista/7, Windows 8, and macOS.
To Next Page
