Logitech RALLY CAMERA User Manual

English 9
PAIRING THE REMOTE
Your camera and remote control are paired at the factory. However, if you need to pair
a remote to the camera (such as when replacing a lost remote) do the following:
1. Press and hold button on the back of the camera until LED ashes blue.
2. Press and hold the Video Mute button on the remote for 10 seconds to place it
in pairing mode.
3. Once the remote and camera are paired the LED will stop ashing
4. If the pairing fails, the LED will keep ashing. Start from step 2 and repeat.
FOR MORE INFORMATION
You can nd additional information on Rally including:
– FAQs
– Firmware Upgrades
– Software Downloads
– Support Community
– Warranty Information
– Replacement Parts
– And more at
www.logitech.com/support/rallycamera

Logitech RALLY CAMERA Specifications

General

Field of View	90°
Zoom	15x HD zoom
Pan Range	±90°
Tilt Range	+50° / -90°
Connection	USB 3.0
Autofocus	Yes
UVC Support	Yes
Video Compression	H.264
Remote Control	Yes
Mounting	tripod mount
Compatibility	Windows 7, Windows 8.1 or Windows 10, macOS 10.10 or higher, Chrome OS
Microphone	No
Certifications	Microsoft Teams, Zoom, Skype for Business
Resolution	Up to 4K
Dimensions	182.5 mm x 152 mm x 152 mm