Logitech RUGGED COMBO - Apply the Screen Protector

3 English
APPLY THE SCREEN PROTECTOR
1. Pull Tab 1 to remove the clear lm from the
screen protector.
2. Align the screen protector with the iPad screen,
making sure the home button and front camera
holes are aligned.
3. Once aligned, place the screen protector on the iPad
and press down.
4. Using the rubber squeegee, remove any air bubbles by
pressing from the center of the iPad out to the edge.
5. Pull Tab 2 to remove the clear lm on the
screen protector.
1
Tab 1
Tab 2
2
2
2
2