o Connect using Bluetooth:
Open the Bluetooth settings on your computer to complete the pairing.
Click here for more details on how to do this on your computer. If you
experience issues with Bluetooth, click here for Bluetooth troubleshooting.
3. Install Logi Options+ Software
Download Logi Options+ to use all the possibilities this keyboard has to offer. To
download and learn more, go to logitech.com/optionsplus.
PAIR TO A SECOND COMPUTER WITH EASY-SWITCH
Your keyboard can be paired with up to three different computers using the Easy-Switch button
to change the channel.
1. Select the channel you want and press and hold the Easy-Switch button for three
seconds. This will put the keyboard in discoverable mode so that it can be seen by your
computer. The LED will start blinking quickly.
2. To connect your keyboard to your computer:
o Bluetooth: Open the Bluetooth settings on your computer to complete the
pairing. You can find more details here.
o USB receiver: Plug the receiver to a USB port, open Logitech Options, and select:
Add devices > Setup Unifying device, and follow the instructions.
3. Once paired, a short press on the Easy-Switch button will allow you to switch channels.
To Next Page
Loading...
Need help?
General
