Logitech ZONE 305 - Page 9

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during
conversations so you are aware of how loud youare
talking. In Logi Tune, select the sidetone feature,
andadjust the dial accordingly.
– A higher number means you hear more external sound.
– A lower number means you hear less external sound.
AUTO SLEEP TIMER
By default, your headset will automatically power o
when not in use for 30 minutes to conserve battery.
Adjust the sleep timer in Logi Tune. To wake up
yourheadset, try press the power switch again.
RECONNECT YOUR HEADSET
Only available for versions with receiver
In case the headset is disconnected to the receiver,
youcan reconnect your headset via Logi Tune.
1. Plug USB-C receiver or USB-A adapter with
theUSB-C receiver into the computer USB port.
2. Power on the headset by long pressing
thepowerbutton.
3. Open Logi Tune Desktop on your computer.
4. Select “Zone Receiver” from the dashboard.
5. Wait while it is looking for the previously
connectedheadset.
6. If no headset is shown as connected to the receiver,
click “Pair headset”.
7. Enter pairing mode on the headset by long
pressingthe power button until the headset LED light
starts blinking.
8. Once successfully paired, the light indicator on
thereceiver and on the headset will turn solid white.
9English