Logitech ZONE 750 Installation Guide

HEADSET FIT
Adjust headset by sliding headband open or closed on both sides.
ADJUSTING THE MICROPHONE BOOM
1. Microphone boom rotates 270 degrees. Wear it on either left or right side. To activate audio channel switching,
download Logi Tune at: www.logitech.com/tune
2. Adjust flexible microphone boom location to capture voice better.
HEADSET IN-LINE CONTROLS AND INDICATOR LIGHT

Logitech ZONE 750 Specifications

Audio Specifications

input impedance	32 Ohms
sensitivity (headphone)	99 dB SPL/1 mW/1K Hz
sensitivity (microphone)	Main mic: -48 dBV/Pa, Secondary mic: -40 dBV/Pa
frequency response (headset)	20-16 kHz
frequency response (microphone)	100-16 kHz

Cable

cable length	1.9 m