Logitech ZONE 900 - Page 21

Connecting to your headset
Keep your receiver plugged in during the
connection process and make sure your
headset for is in pairing mode.
Cancel pairing
Connection successful
Device is ready to use.
Done
New receiver found
Press and hold the paring button on your
headset for 3 sec to enter pairing mode.
Show me how
Continue
Daya
4. Masuk ke mode pairing di headset dengan
menekan tombol daya selama 3 detik.
KlikContinue (Lanjutkan).
5. Jika mode pairing berhasil, indikator lampu
direceiver dan headset akan berkedip putih.
6. Setelah melihat informasi ini di layar,
receiverkini telah pairing dengan headset.
Indikator lampu di receiver dan headset
akanberubah putih stabil.
Indonesia 21