Logitech ZONE VIBE 100 - Connectivity and Adjustment; Connect via Bluetooth

LOGI Zone Vibe 100
2 sec.
CONNECT YOUR HEADPHONES
Connect via BLUETO OTH
®
1. Slide the switch to the bottom in the arrow’s
direction for 2 seconds to initiate pairing.
2. The LED light will ash white rapidly.
3. Open Bluetooth
®
settings on your device.
4. Select Logi Zone Vibe 100 in discoverable devices.
5. Once successfully paired, the LED light will turn
solid white.
ADJUSTING HEADPHONES
1. Adjust the headphones by sliding earcups up
anddown the extended part of the headband.
2. It may be easier to adjust the headphones
on your head. Slide the earcups up and down
theheadband until they sit comfortably on
yourears.
6 English