Connecting to your headset
Keep your receiver plugged in during the
connection process and make sure your
headset for is in pairing mode.
Cancel pairing
Zone Wireless connected
Your headset is ready to use.
Done
New receiver found
Press and hold the paring button on your
headset for 3 sec to enter pairing mode.
Show me how
Continue
Power
4. Enter pairing mode on headset by pressing the
power button for 3 seconds. Click Continue.
5. If pairing mode is successful, light indicators
on the receiver and headset will ash white.
6. Once you see this screen, the receiver is now
paired with the headset. Light indicators on
the receiver and headset will turn solid white.
5 English
To Next Page
Loading...
Need help?
General