Need help?Do you have a question about the LogTag UHADO-16 and is the answer not in the manual?
Records changes and updates made to the manual across different versions.
Procedure for mounting Surface Mount Devices (SMD) onto the PCB.
Baking components and PCBA to remove moisture and solvents.
Safely detaching printed circuit boards (PCBs) from their manufacturing panel.
In-Circuit Programming (ICP) and initial functional testing of the PCBA.
Verifying the electrical integrity of the UHADO USB connector.
Comprehensive functional and calibration testing of the PCBA using a test fixture.
Detailed steps for soldering the battery contacts onto the PCB.
Mounting the PCB into the case and swaging interface contacts.
Procedure for soldering the electrolytic capacitor onto the PCBA.
Installing the piezo disk, frame, and USB boot into the device case.
Assembling front case components, including LCD and sensor seal.
Firmly pressing the bottom and top case halves together.
Checking the assembled case thickness against specified dimensions.
Securing the case halves by correctly installing the case screws.
Correct procedure for inserting the CR2032 battery into its compartment.
Verifying product functions and configuring settings via USB interface.
Verifying all LCD segments, beeper, and LED functionality.
Testing the start button for recording initiation and associated LED status.
Installing the sensor pin and the filter mesh into the case.
Applying protective tape and fitting the USB cover boot for protection.
Subjecting the product to temperature cycle stress as per test requirements.
Reconditioning the humidity sensor element to restore its accuracy.
Final verification of product functionality and default profile setup.
Setting up product for shipping, including labelling and serialization.
Procedure for packing LogTag devices in protective bags and shipping boxes.
Steps for obtaining approval to ship the batch after required storage and testing.
3D visual representation of PCBA components and their layout.
Detailed electrical circuit schematic diagram of the PCBA.
Comprehensive list of all components used in the UHADO-16 product.
Specifications and connection details for In-Circuit Programming (ICP).
General| Brand | LogTag |
|---|---|
| Model | UHADO-16 |
| Category | Data Loggers |
| Language | English |
To Next Page
