Lojer Modux - Page 11

Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 8
Electrical protection class II
Type BF Applied Part Indoor use only
*) IP protection class according
to EN 60529 (Note: marking in
electric component is not
considering whole device. See
chapter 13.1).
Weight of the device
Product marked with this
symbol shall not be processed
as household waste. See
Recycling -Chapter.
Symbol of temperature limits
for transportation, storage or
operating (Check values!)
Symbol for humidity limits;
transportation, storage or
operating
(Check values!)
Symbol for atmospheric
pressure limits;
transportation, storage or
operating
(Check values!)
This side up
(packaging label)
Fragile, handle with
care
(packaging label)
Store in a dry place
(packaging label)
Table 1. Explanations of used symbols
*) IP = ingress protection. The IP rating is an international rating system for
electrical equipment and enclosures. For example, IPX4, the first letter X (or
number) after IP, means protecting the device from the ingress of dust or
particles. X indicates that the requirement does not exist or has not been
tested. The second marking after IP indicates protection against water or
water droplets, e.g. the number 4 indicates protection against splashing water.