What to do if none of the motors work on my Lojer Medical Equipment?
If none of the motors are working on your Lojer Medical Equipment, first, ensure the power cord is properly plugged in. Then, check the condition of the cord. If the problem persists, further assistance may be needed.
How to troubleshoot when one of the actuators does not function on Lojer Medical Equipment?
If one of the actuators on your Lojer Medical Equipment isn't working, start by checking all wires to ensure they are connected and in good condition. If the issue continues, test the hand-held controller by using a similar, functioning controller. If necessary, replace the hand-held controller. If problems persist, cross-connect the motor wires in the control unit to check the motor condition.
Defines owners, intended users, and patients, outlining responsibilities for safe use.
Specifies the target patient age, height, weight, BMI, and suitable environments.
Guidelines for connecting, managing, and disconnecting the bed's power cord safely.
Explains various symbols used on the bed, packaging, and instructions for safe operation.
Details warnings related to patient size, weight limits, and mattress compatibility.
Describes the functions and indicators of the bed's primary adjustment control unit.
Step-by-step guide to set up the bed from its transport position for patient use.
Instructions for attaching and detaching the bed's safety side rails.
Details on how to operate individual and dual locking wheel systems.
Explains how to raise, lower, and tilt the bed surface using the hand control.
Guidelines for proper installation, function, and use of the bed's side rails.
Steps to configure the bed for safe movement and storage.
Instructions for mounting and using the lifting pole accessory.
Guidance on installing and using the lift support aid.
Specifies mattress size requirements and correct positioning on the bed.
Instructions for installing the raised side rail for enhanced patient safety.
How to install and use the IV pole for administering fluids.
Procedures for cleaning the bed's non-fabric components safely.
Guidelines for washing and maintaining the mattress's hygienic cover.
Routine checks to be performed every six months for proper bed function.
Detailed annual inspection, maintenance, and testing procedures for the bed.
Steps to test the bed's mechanisms and overall functionality under load.
Basic information on electromagnetic compatibility and potential interference.
Details the bed's compliance with immunity tests for various electromagnetic environments.
Explains the information found on the bed's identification and specification label.
Lists the harmonized standards followed in the bed's design and manufacturing.
Illustrated breakdown of the bed's frame and electrical parts for spare part identification.
Visual representation of electrical components and their wiring connections within the bed.
Outlines the warranty period and conditions for the nursing bed and its components.
General| Brand | Lojer |
|---|---|
| Model | Modux |
| Category | Medical Equipment |
| Language | English |
To Next Page
