Lojer Modux - Technical Specifications

Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 52
Technical specifications
(*Dimension of the spiral cable when it is not pulled. Use only original spare parts)
Image 55. Dimensions of the Lojer Modux
(See page 9. Image 4.)
Weight without equipment
(80/90cm)
92
/
96 kg
Length (A) 223 cm
Total width (B)
90 cm or 100 cm
Bed surface height (C)
30-69 cm (or 35-74 cm, dual
locking systems for wheels)
Bed end height (D)
45
,5
cm (
at
minimum)
Backrest angle (
E
)
0
-
7
1
°
Thigh rest angle (
F
)
0
-
3
8,5
°
Leg rest angle (
G
)
0
-
1
2
°
Height of the leg rest (max) (H) 17,5 cm
Space-reservation for a patient-lift (I)
15 x 140 cm
Mattress dimensions (see guidelines
Chapter 7.3 and 7.5)
78-80 cm or 88-90 cm x 200-
205 cm x 9–13 cm
Size in transport position
90 cm or 100 cm x 60 cm x
127 cm
Noise
45 dB (A)
Transportation
/ storage
temperature
-20 °C - + 50 °C
Operating temperature
+10
°C
-
+ 40 °C
Relative humidity
30
%
-
75 %
Atmospheric pressure
80 kPa – 106 kPa
Altitude
< 2000m
Maximum length of power cord (spiral
cable)
2 m *
Maximum length of hand control unit
cord (spiral cable)
1,9 m *
Maximum load (SWL) 170 kg
Maximum patient weight 135 kg
Bedding 20 kg
Accessories 15 kg